Miele DA 259-4 U Bedienings- en installatie-instructies - Pagina 17

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 259-4 U. Miele DA 259-4 U 32 pagina's. Cooker
Ook voor Miele DA 259-4 U: Bedienings- en installatie-instructies (36 pagina's)

Pagina afdrukken

Grease filters

The reusable metal grease filters

remove solid particles from the vented

kitchen air (grease, dust, etc).

The grease filters should be cleaned

every 3 - 4 weeks or whenever the

grease filter indicator lights.

A dirty filter is a fire hazard.

^ To remove the grease filters pull the

locking clips, 1, forward. Lower the

filter 45°, 2, unhook it at the rear, 3,

and take it out. Support the grease

filter so that it does not fall onto the

cooktop.

Cleaning the grease filters

^ By hand: use a scrub brush with a

solution of warm water and mild

detergent.

Do not use the pure detergent,

aggressive all purpose cleaners,

oven sprays or limescale removers.

They could destroy the filters.

Cleaning and Care

^ In a dishwasher: place the filters

vertically in the lower basket, making

sure that the spray arm is not

blocked.

Use a hot temperature program, e.g.

"Heavy Soil" or "Pots and pans".

Use the recommended amount of

dishwasher detergent. Overuse could

destroy the filter.

Depending on the detergent,

cleaning the grease filters in a

dishwasher may cause permanent

discoloration of the filter surface.

Performance of the filter will not be

affected by this discoloration.

^ After cleaning, the filters can be

placed on a towel to air dry.

^ While the filters are removed, clean

any dirt or grease from the filter

casing to prevent the risk of fire.

When putting the grease filters back

make sure that the locking clips are

visible facing down towards the

cooking surface.

If the filters are incorrectly installed,

insert a small screwdriver into the slit

along its edge to disengage it from the

casing.

^ After returning the grease filters,

press the grease filter button for

3 seconds to reset the timer. The

indicator light will go out.

^ If the grease filters are cleaned

before the grease filter timer has

reached its maximum, the grease

filter button should be pressed for

6 seconds to reset the counter to

zero.