Miele DA 262 i Gebruiksaanwijzing - Pagina 18

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele DA 262 i. Miele DA 262 i 28 pagina's.

Installation

Lift the cooker hood into the unit

from below until the lugs of the

brackets lie above the support

tracks. Then carefully lower the

cooker hood. The lugs engage with

the support track.

To align the height, turn the

M 6 x 19 mm adjuster screws clock-

wise or anti-clockwise.

Move the cooker hood into its

correct position.

Secure the cooker hood on both

sides using four 3 x 16 mm

( 5/8 ")screws for each side.

Feed the air extraction or air re-circu-

lation connector through as applic-

able, (see chapter "Air extraction" /

"Air re-circulation").

Replace the dividing wall in the wall

unit.

Pull the deflector plate out to its limit

and remove the grease filters.

4 holes (DA 262 i / DA 272 i) or

6 holes (DA 292 i) are now visible.

Use a sharp pointed instrument

through these holes to gouge out the

fixing holes.

Then screw the cooker hood se-

curely to underside of wall unit.

Replace the grease filters.

Depth alignment

Units deeper than 285 mm require the

fitting of a spacer bar to prevent va-

pours collecting between the rear of

the cooker hood and the wall.

To achieve the correct depth shorten

the . . .

. . . spacer bar at the required break-

ing points.

. . . End caps.

Fit the end caps (1) to both ends of

the spacer bar.