Miele DA 3190 Bedienings- en installatie-instructies - Pagina 31

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 3190. Miele DA 3190 40 pagina's. Ventilation system
Ook voor Miele DA 3190: Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (40 pagina's), Afmetingen (1 pagina's), Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (40 pagina's)

Pagina afdrukken
Miele DA 3190 Bedienings- en installatie-instructies
^ Place the exhaust ducting on the fan
connection for the rangehood.
^ See "Connection for air extraction" for
further instructions on fitting the
ducting.

Set up for recirculation mode

If site conditions are not suitable for the
rangehood to be used with air
extraction, the appliance must be set
up for recirculation.
For this, a conversion kit DUU 151,
available from your Miele Chartered
Agent, or Miele is required.
^ The non-return flap is not needed for
the recirculation mode. Depending
on model, it may already be fitted.
Pull the non-return flap off the bracket
from vent connection.
You will also need a charcoal filter (see
"Technical data").
dai2700
^ Fit the conversion kit as described in
the installation instructions supplied
with the kit.
^ Make sure that the slats on the
exhaust grille are directed towards
the middle of the room, and not
towards the wall or the ceiling.
^ Fit the charcoal filter (see "Cleaning
and care").

Electrical connection

Refer to the notes in "Electrical
connection" and "Warning and
Safety instructions" before
connecting to the electricity supply.
Installation
31