Miele DA 3466 Bedienings- en installatie-instructies - Pagina 24

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 3466. Miele DA 3466 48 pagina's.
Ook voor Miele DA 3466: Bedienings- en installatie-instructies (48 pagina's), Bedienings- en installatie-instructies (48 pagina's), Bedienings- en installatie-instructies (48 pagina's), Bedienings- en installatie-instructies (48 pagina's)

Cleaning and care

Changing a light bulb

The bulbs should be replaced with the

following:

Bulb type .............................. LED, GU10

Power ............................................... 3W

Replacement bulbs are available from

Miele.

 Pull out the fume deflector, and

remove the grease filter as described

above.

 Turn off the blower and the lighting.

Please note that bulbs become very

hot during use.

They can cause burns even after

being shut off for some time.

Allow the bulbs to cool down for a

few minutes before changing them.

 Remove the charcoal filter if the hood

is being used in recirculation mode.

 Disconnect the hood from the

electrical supply before replacing the

bulbs (see "IMPORTANT SAFETY

INSTRUCTIONS").

 Reach through the opening in the

safety panel and push the lighting

unit slightly downwards.

 Turn the bulb counter-clockwise and

pull it out.

 Screw the new bulb into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.

 Replace the grease filter and, if being

used in recirculation mode, the

charcoal filter.