Miele DA 3496 Bedienings- en installatie-instructies - Pagina 24

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 3496. Miele DA 3496 48 pagina's.
Ook voor Miele DA 3496: Bedienings- en installatie-instructies (48 pagina's), Bedienings- en installatie-instructies (48 pagina's), Bedienings- en installatie-instructies (48 pagina's)

Cleaning and care

Changing a lamp

The lamps should be replaced with the

following:

Manufacturer ............................... EGLO

Lamp type .................................... GU10

Specification................................ 11427

Wattage ........................................... 3 W

These lamps are available from Miele or

from specialist retailers.

 Pull out the deflector plate, and

remove the grease filter as described

earlier.

 Switch off the fan and the lighting.



Note that lamps become very

hot when in use.

They can cause burns even after

being switched off for some time!

Allow the lamps to cool down for a

few minutes before changing them.

 Remove the charcoal filter if the

cooker hood is being used in

recirculation mode.

 Disconnect the cooker hood from the

mains electrical supply before

replacing the lamps (see "Warning

and Safety instructions").

 Push down the lighting unit slightly

via the opening in the safety panel.

 Turn the lamp anti-clockwise and pull

it out.

 Screw the new lamp into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.

 Replace the grease filter and, if being

used in recirculation mode, the

charcoal filter.