Miele DA 362-110 Bedienings- en installatie-instructies - Pagina 32

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 362-110. Miele DA 362-110 40 pagina's. Ventilation system
Ook voor Miele DA 362-110: Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (40 pagina's)

Pagina afdrukken
Miele DA 362-110 Bedienings- en installatie-instructies
32
^
In recirculation mode, one cut out
must be made, where the ducting
ends, for the installation of the
recirculation vents, b.
If installing the hood over an island or
in a cabinet at ceiling height, a
suitable cut-out has to be made in
the front panel, d.
^
In recirculation mode, 2 cut outs must
be made, where the ducting ends, for
the installation of the recirculation
vents, b.
If installing the hood over an island or
in a cabinet at ceiling height, a
suitable cut-out has to be made in
the front panel, d.
^ The exhaust connection, a, and the
recirculation vent, b, are joined
together with a pipe or flexible duct,
c, cut to size.
When installing the recirculation
vents make sure that the slats point
towards the center of the room and
not to a wall or the ceiling.
^ Install the active charcoal filters (see
"Cleaning and Care").