Miele DA 409 Bedienings- en installatiehandleiding - Pagina 24

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Miele DA 409. Miele DA 409 40 pagina's. Ventilation system
Ook voor Miele DA 409: Bedienings- en installatie-instructies (36 pagina's), Installatie-instructies (1 pagina's), Productafmetingen (2 pagina's), Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (36 pagina's)

Pagina afdrukken
Miele DA 409 Bedienings- en installatiehandleiding
Cleaning and care
Fitting and replacing the
charcoal filter
If the cooker hood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
It is designed to absorb cooking
odours.
It is fitted in the canopy above the
grease filters.
New filters can be purchased from
your Miele dealer or from the Miele
Spare Parts Department.
See back cover for contact details,
and "Technical data" for the model
number of the filter.
^ Before fitting or replacing a charcoal
filter, the grease filters must first be
taken out (see previous section for
instructions on how to do this).
^ Take the charcoal filter out of its
packaging.
^ Insert the charcoal filter into the
canopy.
When fitting for the first time:
^ Set the operating hours counter to
suit your requirements (see
"Operation").
24
Always replace the charcoal filter im-
mediately if
– the indicator lamp for the charcoal
filter touch control lights up,
or
– if it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
^ After fitting the new charcoal filter,
press the charcoal filter touch control
for approx. 3 seconds to re-set the
operating hours counter.
The indicator lamp will go out.
If a charcoal filter is replaced before the
operating hours counter has reached
its maximum, the charcoal filter touch
control should be pressed for approx. 6
seconds to reset the counter.