Miele DA 409 Bedienings- en installatie-instructies - Pagina 15

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 409. Miele DA 409 36 pagina's. Ventilation system
Ook voor Miele DA 409: Bedienings- en installatie-instructies (36 pagina's), Installatie-instructies (1 pagina's), Productafmetingen (2 pagina's), Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (36 pagina's), Bedienings- en installatie-instructies (36 pagina's)

Pagina afdrukken
Miele DA 409 Bedienings- en installatie-instructies
The number of hours the appliance has
been in operation is stored in memory.
The indicator lamp for the grease filter
touch control will come on after 30
hours of operation. The
must then be cleaned.
After the filters have been replaced, the
filter operating hours counter must be
reset.
^ To do this, press and hold the grease
filter touch control for about 3
seconds.
The indicator lamp for the touch control
will go out.
For recirculation mode, the operating
hours counter for the charcoal filter
needs to be set to the required time
(see "Setting and altering the charcoal

filter operating hours counter").

The indicator lamp for the charcoal filter
touch control will light up after the
cooker hood has operated for the
number of hours set. The
must then be replaced with a new
one.
After the charcoal filter has been
replaced, the filter operating hours
counter must be reset.
^ Press the charcoal filter touch control
for about 3 seconds.
The indicator lamp for the touch control
will go out.
To check the percentage of time set
already used:
^ Press the On/Off touch control to
switch the fan on.
^ Press and hold the grease filter or the
charcoal filter touch control.
One or more of the indicator lamps for
the " / " touch controls will flash.
The number of flashing lamps shows
the percentage of the operating time
which has already been used up.
1 lamp
= 25 %
2 lamps = 50 %
3 lamps = 75 %
4 lamps = 100 %
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
15