Miele DA 428-4 Bedienings- en installatie-instructies - Pagina 15

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA 428-4. Miele DA 428-4 40 pagina's. Cooker
Ook voor Miele DA 428-4: Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatiehandleiding (40 pagina's)

Miele DA 428-4 Bedienings- en installatie-instructies

To switch the fan on

^ Press the On/Off touch control.
The fan runs at power level "II".
The indicator lamp will come on.
If the cooker hood has been
connected to a window contact
switch via the DSM 400 control
module, then the fan cannot be
switched on if the window is shut.
The indicator lamp will flash.

To select a power level

^ Use the – / + controls to select the
power level required.
+ control = higher setting
– control = lower setting
Depending on the intensity of the
cooking vapours, levels I to III are
usually sufficient for normal cooking.

Intensive setting

For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, you may wish
to select the Intensive Setting "IV".
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^ To set this option, both the fan and
the hob lighting must be switched off.
^ Press the run-on option touch control
for approximately 10 seconds. The
first fan setting indicator will light up.
^ Then press in turn,
– the touch control for the lighting,
– the – touch control, and
– finally the touch control for the
lighting again.

Operation

15