Miele DA2280 Bedienings- en installatie-instructies - Pagina 27

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA2280. Miele DA2280 44 pagina's. Ventilation system
Ook voor Miele DA2280: Bedienings- en installatie-instructies (36 pagina's), Afmetingen (1 pagina's), Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Handleiding voor installatie-instructies (19 pagina's)

Changing a light bulb

The bulbs should be replaced with the

following:

GU/GZ 10, 120 V, 50 W

Replacement bulbs are available from

Miele.

 Disconnect the hood from the

electrical supply before replacing the

bulbs (see "IMPORTANT SAFETY

INSTRUCTIONS").

 Remove the grease filters.

 Remove the charcoal filters if the

hood is used in recirculation mode.

Please note that bulbs become very

hot during use.

They can cause burns even after

being shut off for some time.

Allow the bulbs to cool down for a

few minutes before changing them.

Cleaning and care

 Reach through the opening in the

safety panel and push the lighting

unit slightly downwards.

 Turn the bulb counter-clockwise and

pull it out.

 Screw the new bulb into the socket

and push it upwards. Please follow

the manufacturer's safety

instructions.

 Replace the grease filters and, if

using the hood in recirculation mode,

the charcoal filters.