Miele DA2280 Bedienings- en installatie-instructies - Pagina 34

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA2280. Miele DA2280 44 pagina's. Ventilation system
Ook voor Miele DA2280: Bedienings- en installatie-instructies (36 pagina's), Afmetingen (1 pagina's), Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Handleiding voor installatie-instructies (19 pagina's)

Installation

Exhaust air connection

 If necessary, install the non-return

flap. Make sure that the flap opens

easily and can also close again by

itself.

On the DA 2210, one non-return flap

is used in each of the two exhaust

connectors.

 Attach the exhaust duct, e.g. a

flexible hose, to the exhaust collar

using a hose clamp (available as an

optional accessory). If using 

5" (125 mm) ducting, insert the

supplied reducing collar into the

exhaust collar (see "Exhaust duct").

 Place the exhaust duct on the hood's

exhaust connector.

 See "Exhaust duct" for additional

instructions on installing the ducting.

 DA 2210: The hood has two exhaust

connectors for use with two 

6" (150 mm) exhaust ducts. The hood

comes with a "Y" adapter that can be

used to feed the exhaust air from

both connectors to a single 

8" (200 mm) duct.