Miele DA6891ASP Bedienings- en installatie-instructies - Pagina 34
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele DA6891ASP. Miele DA6891ASP 40 pagina's. Downdraft
Pagina afdrukken
Electrical connection
WARNING: TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
All electrical work should be
performed by a qualified electrician
in strict accordance with national
regulations (for USA: ANSI-NFPA 70)
and local safety regulations.
Installation, repairs and other work
by unqualified persons could be
dangerous.
Ensure that power to the appliance is
OFF while installation or repair work
is performed.
The ventilation system may only be
used with Miele DAG 600 or DAG
1000 blowers.
Verify that the voltage, load and
circuit rating information found on
the data plate, match the household
electrical supply before installing the
hood.
Use only with ventilation hood cord-
connection kits that have been
investigated and found acceptable
for use with this model hood.
If there is any question concerning
the electrical connection of this
appliance to your power supply,
please consult a licensed electrician
or call Miele's Technical Service
Department.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
34
Grounding Instructions
WARNING - Improper grounding can
result in a risk of electric shock.
This appliance must be grounded. In
the event of an electrical short
circuit, grounding reduces the risk of
electric shock by providing a path of
least resistance.plug.
If there is any doubt, have the
electrical system of the house
checked by a qualified electrician.
To increase security before the
machine is installed, it is
recommended to install a protective
switch (30 mA).
Power supply
Open the cover of the power
connection box.
Remove the cover from the cord
entry, e.g. with the aid of a
screwdriver.
Install an approved cable clamp or
connector.