Miele PDR 544 Bedienings- en installatie-instructies - Pagina 23
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele PDR 544. Miele PDR 544 38 pagina's. Commercial tumble dryers
Ook voor Miele PDR 544: Bedienings- en installatie-instructies (36 pagina's)
Starting a
programme
Programme
running time/Time
left estimation
Energy saving
At the end of the
programme
- The drum will rotate briefly every hour until the start of the
programme to reduce laundry creasing (Anti-crease function).
4. Starting a programme
Touch the flashing Start/Stop sensor.
The Start/Stop sensor lights up.
Programme sequence
- If Delay Start has been selected, the Delay Start period will start to
count down first.
- With a longer Delay start time, the drum will rotate occasionally.
This will loosen up the laundry.
- The programme starts.
The programme running time depends on the quantity of laundry, the
type of fabric, the residual moisture in the laundry and the water
hardness. The displayed programme running time for drying level
programmes can therefore vary or "jump". The tumble dryer's
electronic module adapts during the ongoing drying programme. The
displayed programme running time becomes more and more
accurate.
When using the programmes for the first time, the displayed time
sometimes deviates significantly from the real time left. The
difference between the estimated and achieved time becomes
smaller if the corresponding programme is run more often. If
different load sizes are dried in one programme, the time left display
can only show an approximate time.
Laundry items and fabrics can wear out unnecessarily.
Avoid overdrying laundry and garments.
After a programmed time, the indicators dim. The Start/Stop sensor
flashes slowly.
Touch the Start/Stop sensor to switch the indicators back on.
Energy saving for the indicators will not affect a running programme.
- Before the programme finishes, the laundry is cooled.
5. End of the programme – unloading the drum
The laundry is cooled down shortly before the end of the programme.
The laundry can then be removed.
The programme has ended when only is shown in the display.
If Anti-crease has been selected (see "Programmable functions"), the
drum will rotate in intervals. This reduces creasing if the laundry
cannot be removed straight away.
Drying
23