Miele PDR 910 G Snelstarthandleiding - Pagina 23

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Miele PDR 910 G. Miele PDR 910 G 48 pagina's. Commercial tumble dryer

Pagina afdrukken
End of pro-
gramme
Removing the
laundry

Care notes

vary or "jump". The tumble dryer's electronic module adapts during
the ongoing drying programme. The displayed programme running
time becomes more and more accurate.
When using the programmes for the first time, the displayed time
sometimes deviates significantly from the real time left. The differ-
ence between the estimated and achieved time becomes smaller if
the corresponding programme is run more often. If different load
sizes are dried in one programme, the time left display can only
show an approximate time.

End of the programme

The laundry will be cooled down after the end of the programme. The
Finish/Cool down
message
ing phase. The laundry can now be removed.
If necessary, the control can be programmed so that a message in-
dicating the end of the programme is only displayed once the cool-
ing phase has ended (
phase status
).
After the cooling phase and the drying programme are completed, the
Finish
message
is displayed.
The tumble dryer will switch off automatically after the set time after
the end of the programme.
Anti-crease 
If the
rotate in intervals after the end of the programme. This reduces creas-
ing if the laundry cannot be removed straight away.
* The Anti-crease function is switched off as the factory default set-
ting and can be activated in the supervisor level.
Open the door.
Remove everything from the drum.
Items left in the tumble dryer could be damaged by overdrying
when the tumble dryer is used the next time.
Always remove all items from the drum.
Switch the tumble dryer off by pressing the  button.
This tumble dryer requires regular maintenance, particularly if it is
used on a continuous basis. Please see "Cleaning and care" for de-
tails.
will appear on the display during the cool-
Supervisor level/Process technology/Cooling
* extra has been selected, the drum continues to
Drying
23