HP 117755-003 - ProSignia - 740 Implementatiehandleiding - Pagina 20
Blader online of download pdf Implementatiehandleiding voor {categorie_naam} HP 117755-003 - ProSignia - 740. HP 117755-003 - ProSignia - 740 35 pagina's. Memory technology evolution: an overview of system memory technologies, 8th edition
Ook voor HP 117755-003 - ProSignia - 740: Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Overzicht (20 pagina's)
![HP 117755-003 - ProSignia - 740 Implementatiehandleiding](/uploads/products/server2/3430839/3430839.png)
• Array Configuration Utility (www.hp.com/cgi-bin/hpsupport/index.pl)
• System Configuration Utility (www.hp.com/cgi-bin/hpsupport/index.pl)
These utilities are not required for servers with RBSU/ORCA.
SmartStart configuration
If performing a fresh installation to an empty hard drive, HP recommends that using SmartStart to
configure the server. SmartStart provides assisted, manual, and replicated installation approaches to
setting up the pre-OS installation and installing the necessary software after the OS installation.
SmartStart is provided in the HP ProLiant Essentials Foundation Pack included with every HP ProLiant
server. Updates are available on the SmartStart website at
The SmartStart Scripting Toolkit, also included in the HP ProLiant Essentials Foundation Pack, offers
scripting tools for high volume server deployment and enables unattended automated installation. To
learn more about this product and review its best practices guide, check the website at
www.hp.com/servers/sstoolkit
Included with every HP ProLiant BL10e server, and recommended for large numbers of HP ProLiant
ML/DL servers, is the HP ProLiant Essentials Rapid Deployment Pack. Integrating the Altiris eXpress
Deployment Server and the SmartStart Scripting Toolkit, the Rapid Deployment Pack provides a
simplified point-and-click solution for deploying and maintaining standard server software
configurations.
For additional information on this advanced deployment tool, visit
Installation steps
Complete the following steps to install Microsoft Windows 2000 on the server.
Prepare the pre-boot environment prior to booting the Windows 2000 OS. This involves the
1.
following steps:
a.
Update the System and Option ROMs as necessary for the hardware.
b.
Set up the system and boot partition if necessary.
c.
Configure the storage arrays
Using SmartStart to facilitate all of these steps is highly recommended as is following the steps
provided in the SmartStart documentation. In addition to providing a step-by-step approach to
complete system software installation, SmartStart also intelligently guides the system setup based
on the availability of ROM-based server setup and storage array configuration tools.
IMPORTANT
Existing NTFS partitions automatically upgrade to NTFS 5
partitions. Windows NT 3.51 systems on the same server
cannot access NTFS 5 partitions; Windows NT 4.0 on the
same server cannot read NTFS 5 partitions unless Microsoft
Service Pack 4 or later has been installed.
Boot from the Microsoft Windows 2000 CD to install the operating system. The product key code
2.
and licensing information are also required. When prompted, create a new partition with at least
1 GB of free space. Detailed instructions for installing Windows 2000 can be found in the Help
files on the Windows 2000 CD.
Help files for Windows 2000 Server Edition can also be found at
http://technet.microsoft.com/en-us/windowsserver/2000/default.aspx. For Windows 2000
.
www.hp.com/servers/smartstart
www.hp.com/servers/rdp
.
.
20