Miele PT 6185 Gebruiksaanwijzing - Pagina 11
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele PT 6185. Miele PT 6185 20 pagina's.
Pagina afdrukken
Add or remove laundry during a
program
^ Press the "a Door" button.
^ Add or remove laundry.
^ Close the drum door.
^ Press the "h Start" button.
The program continues.
Change a program
Once a drying program has started,
changes to the program and any drying
options selected can only be made by
cancelling the current program.
To cancel the current program:
^ Turn the program selector to "End".
When the program has been canceled the
"Anti-crease/End" indicator lights.
^ Turn the program selector either clockwise
or counterclockwise to the new program.
L
^ The "
Low temperature" and "l Buzzer"
features can be selected at this time.
^ Press the "h Start" button.
When the program selector is turned after a
program has started, the "On" indicator
flashes. It will stop flashing, when the
program selector is turned back to the
selected program or turned to "End" to
cancel the program.
Note
If the "l Check lint filter" light comes on, the
lint filter needs to be cleaned. Clean the filter
as soon as the program has finished. See,
"Cleaning and Care" for details.
The laundry must not be removed from the
dryer before the drying program has
finished, ie, the cooling down phase must be
completed.
If hot laundry items are stacked or packed
they could auto-combust.
If the laundry is rinsed with hot water in the
final rinse, the residual heat in the laundry
together with the reduced residual moisture
content, will lead to shorter processing times
and save energy.
Program end
At the end of drying the "~ t Anti-crease /
End" indicator will light up and the buzzer
will sound (if selected).
^ Turn the program selector to "t End".
^ Open the drum door.
^ Remove the laundry.
If the laundry is not removed from the
machine at the end of the program an
anti-crease cycle will automatically start.
The drum turns at intervals to minimize
creasing in the laundry.
The anti-crease cycle runs 1 hour.
^ Clean the lint filter.
^ Close the drum door.
^ Press the "s On/Off" button to turn off the
machine.
^ Turn off power at the power main switch.
Operation
11