Miele PT 7186 Vario Gebruiksaanwijzing - Pagina 28
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele PT 7186 Vario. Miele PT 7186 Vario 40 pagina's. Tumble dryer
Ook voor Miele PT 7186 Vario: Commissioning, programmatabel en instellingen (40 pagina's)
Pagina afdrukken
Settings/Supervisor level menu
Time of day
First select whether you want the
clock displayed as a 24 hour or 12
hour clock, or to not display it at all.
Then set the current time of day.
– 24 h clock or 12 h clock
Once the clock display has been
selected, the time of day can be set.
To set the time (of day):
^ Use the jog shuttle to select the
current hour and confirm your
selection.
^ Use the jog shuttle to select the
current minutes and confirm your
selection.
– Time not displayed
If Delay start is activated (see
Settings Delay start), then the timer
will only show the option Start in or
Finish in in hours/minutes.
28
Display contrast
Display brightness
There are ten different display
contrast and display brightness
settings.
The bar chart shows you the setting.
– Factory default: a medium setting.
Demo program
This can be used by dealers to
demonstrate the tumble dryer in their
showrooms.
The controls are operated in the same
way as they would be in normal use.
However, the tumble dryer will not heat
up, and fault messages and the
operating hours counter will not be
displayed.
– Off (factory default)
– On
^ To switch on or off, press OK until
information is displayed.