HP 18-1200 Aan de slag handleiding - Pagina 9
Blader online of download pdf Aan de slag handleiding voor {categorie_naam} HP 18-1200. HP 18-1200 25 pagina's. Quick setup guide
Ook voor HP 18-1200: Snel aan de slag (1 pagina's), Handmatig (13 pagina's), Handleiding voor snelle installatie (21 pagina's)
![HP 18-1200 Aan de slag handleiding](/uploads/products/server2/3431447/3431447.png)
2
Setting up your computer
WARNING! To reduce the risk of electrical shock or damage to your
equipment:
• Place the computer in a location away from water, dust, moisture, and soot.
These can increase the inside temperature, or can cause fire or electrocution.
• Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all
times.
• Disconnect power from the equipment by unplugging the power cord from the
electrical outlet. To prevent direct exposure to laser beam, do not try to open the
enclosure of the CD or DVD drives.
• The power supply is preset for the country/region in which you purchased your
computer. If you move, check the voltage requirements for your new location
before plugging the computer into an AC power outlet.
The computer may be heavy; be sure to use ergonomically correct lifting
procedures when moving the computer.
To reduce the risk of serious injury read the Safety & Comfort Guide. The guide is
located on the web at http://www.hp.com/ergo.
1.
Place the computer so that all ventilation openings are unobstructed and
cabling is not in a walkway or where it can be stepped on or damaged by
placing furniture on it.
2.
Connect all power cords from the monitor, computer, and accessories to a
power surge protection device that is specifically labeled as having surge
protection, an uninterruptible power supply (UPS), or a similar device. If the
computer has a television tuner, or a modem or telephone connection, protect
the computer by using surge protection with these signal inputs as well.
Connect the television cable or the telephone line cord to the surge protection
device, and then connect the device to the computer.
3.
Download and install operating system updates.
a.
Find out what operating system and version your computer is currently
running.
(Click Start > Control Panel and double-click System. The operating
system and version are shown under Windows edition.)
b.
Open your internet browser and go to http://www.hp.com/support.
c.
Select your country and language, if necessary, and click Support &
Drivers.
ENWW
3