HP 200-5250 Aan de slag - Pagina 13

Blader online of download pdf Aan de slag voor {categorie_naam} HP 200-5250. HP 200-5250 24 pagina's. Hp 200-5250: user guide

Symptom

Possible solution

The receiver, wireless keyboard, and wireless mouse shown in the following illustrations are

examples; your models might vary. IMPORTANT: During these steps, place the wireless keyboard

and wireless mouse on the same level as the receiver, within 30 cm (12 inches) of the receiver, and

away from interference from other devices.

Speakers and sound

Symptom

Possible solution

Volume is very

Ensure that you connected the speakers to the Audio Out (lime green) connector on the back of

low or

the computer. (Additional audio connectors are used for multiple-channel speakers.) Detached

unsatisfactory.

non-powered speakers (speakers without a separate power source, such as batteries or a power

cord) do not produce satisfactory sound. Replace the non-powered speakers with powered

speakers.

ENWW

Unplug the receiver from a USB connector on the computer, and then reconnect it. Your

computer model might have a connector dedicated to the receiver. If you have a choice, use

a USB connector on the front of the computer.

Check that the mouse is on (A), and push and hold the Connect button (B) on the underside

of the mouse for 5 to 10 seconds until the LED on the receiver lights or stops flashing. The

receiver connection session times out after 60 seconds. To ensure that the connection was

established, and that the receiver did not time out instead, move the mouse and check for

response on the screen.

Off

Connect

After the mouse connection is established, continue by using the steps that follow to repeat the

procedure for the keyboard.

Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10 seconds

until the LED on the receiver lights or stops flashing.

Speakers and sound