HP 226824-001 - ProLiant - ML750 Implementatiehandleiding - Pagina 24

Blader online of download pdf Implementatiehandleiding voor {categorie_naam} HP 226824-001 - ProLiant - ML750. HP 226824-001 - ProLiant - ML750 35 pagina's. Visualization and acceleration in hp proliant servers
Ook voor HP 226824-001 - ProLiant - ML750: Veelgestelde vragen (4 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Overzicht (20 pagina's), Implementatiehandleiding (26 pagina's), Inleiding Handboek (22 pagina's), Handleiding voor probleemoplossing (18 pagina's), Implementatiehandleiding (11 pagina's), Installatiehandleiding (2 pagina's), Configuratiehandleiding (2 pagina's), Inleiding Handboek (19 pagina's), Handleiding bijwerken (9 pagina's), Handleiding bijwerken (16 pagina's), Inleiding Handboek (12 pagina's), Inleiding Handboek (10 pagina's), Beknopte technologie (9 pagina's)

Pre-boot eXecution environment (PXE)

PXE allows a new or existing system to boot over the network and download software, including

Windows 2000, which is stored on a management or deployment server at another location on the

network. PXE automates setting up and configuring new systems, enables decentralized software

distribution, and remote troubleshooting and repairs.

PXE can be used to deploy Windows 2000 on any server.

HP ProLiant servers supporting PXE (at time of publication) are listed in Appendix a.

For Windows 2000, the implementation of PCI Hot Plug functionality enables hot adds, hot replace,

and hot remove in all PCI Hot Plug-capable slots.

IMPORTANT

To properly implement PCI hot plug with Service Pack 4, use

SmartStart Release 6.30 or SoftPaq13158. Download the SoftPaq

from

www.hp.com/cgi-bin/hpsupport/index.pl.

Power down the device before removing a device from a PCI Hot Plug slot. This can be done using

the PCI Hot Plug Unplug/Eject icon, the Eject/Remove applet of Windows 2000, or the HP PCI Slot

Server Request button on servers so equipped.