HP 2530p - EliteBook - Core 2 Duo 2.13 GHz Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HP 2530p - EliteBook - Core 2 Duo 2.13 GHz. HP 2530p - EliteBook - Core 2 Duo 2.13 GHz 31 pagina's. Notebook pc
Ook voor HP 2530p - EliteBook - Core 2 Duo 2.13 GHz: Specificaties (36 pagina's), Producthandleiding (16 pagina's), Gebruikershandleiding (15 pagina's), Netwerkhandleiding (16 pagina's), Specificaties (2 pagina's), Gebruikershandleiding (27 pagina's), Installatiehandleiding (19 pagina's), Overzicht (16 pagina's), Manuallijnen (12 pagina's), Software-installatiehandleiding (8 pagina's), Manuallijnen (6 pagina's), Installatie- en configuratiehandleiding (18 pagina's), Installatie stuurprogramma (20 pagina's), Handmatig (20 pagina's), Manuallijnen (7 pagina's), Gebruikershandleiding (46 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (42 pagina's), Specificaties (45 pagina's), Gebruikershandleiding (30 pagina's), Gebruikershandleiding (24 pagina's), Quickspecs (46 pagina's)

Setting power options

The computer has two power-saving states enabled at the factory: Sleep and Hibernation.

When Sleep is initiated, the power lights blink and the screen clears. Your work is saved to memory.

Exiting Sleep is faster than exiting Hibernation. If the computer is in the Sleep state for an extended

period or if the battery reaches a critical battery level while in the Sleep state, the computer initiates

Hibernation.

When Hibernation is initiated, your work is saved to a hibernation file on the hard drive and the computer

turns off.

CAUTION:

functionality, or loss of information, do not initiate Sleep or Hibernation while reading from or writing to

a disc or an external media card.

NOTE:

You cannot initiate any type of networking connection or perform any computer functions while

the computer is in the Sleep state or in Hibernation.

NOTE:

When HP 3D DriveGuard has parked a drive, the computer will not initiate Sleep or Hibernation,

and the display will be turned off.

The system is set at the factory to initiate Sleep after 15 minutes of inactivity when running on battery

power and 30 minutes of inactivity when running on external power.

Power settings and timeouts can be changed using Power Options in Windows® Control Panel.

With the computer on, you can initiate Sleep in any of the following ways:

●

Press fn+f5.

●

Click Start, and then click the Power button.

●

Click Start, click the arrow next to the Lock button, and then click Sleep.

To exit Sleep:

Press the power button.

▲

When the computer exits Sleep, the power lights turn on and your work returns to the screen where

you stopped working.

NOTE:

If you have set a password to be required when the computer exits Sleep, you must enter your

Windows password before your work will return to the screen.

To prevent possible audio and video degradation, loss of audio or video playback

Using power-saving states