Miele T 8903 C Gebruiksaanwijzing - Pagina 25

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele T 8903 C. Miele T 8903 C 48 pagina's. Condenser tumble dryer

Pagina afdrukken

Problem

The drying

process goes

on too long

or even

switches off.

* Before remedying a problem:

– Open and close the door.

– Switch the tumble dryer on and off.

Possible cause

The dryer is not working

efficiently or economically*.

The fluff filters may be

clogged with fluff, hair or

detergent residues.

Ventilation to and from the

dryer may be insufficient (e.g.

because it is installed in a

small room). This has caused

the temperature in the room to

rise sharply.

The vents below the door are

covered.

Detergent residue, hair and

fine fluff can block the

condenser unit.

The laundry has not been

spun sufficiently.

The tumble dryer has been

overloaded.

Metallic components, e.g.

zippers have prevented the

dryer from registering the

correct moisture level.

Problem solving guide

Remedy

– Remove any fluff.

– Do not replace fluff filters if

they are damp or wet.

Damp or wet filters could

cause operational faults.

– If this cleaning is not

satisfactory, check the

following points.

– Open a door or window

while the machine is in

operation for increased air

flow.

– Remove any obstructions.

– The condenser unit should

be checked and cleaned

from time to time (See

"Cleaning and care").

– Make sure that your laundry

is thoroughly spun at the

appropriate spin speed in

the washing machine.

– Do not exceed the

maximum load for the

programme selected.

– Open the zippers next time.

– If the problem occurs again,

dry garments with long

zippers using the Warm air

programme (timed drying).