HP 520 - Notebook PC Installatiehandleiding - Pagina 13

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP 520 - Notebook PC. HP 520 - Notebook PC 15 pagina's. Notebook tour - windows vista
Ook voor HP 520 - Notebook PC: Gebruikershandleiding (15 pagina's), Software bijwerken (12 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (20 pagina's), Beveiligingshandleiding (35 pagina's), Gebruikershandleiding (25 pagina's), Gebruikershandleiding (23 pagina's), Handboek (35 pagina's)

Pagina afdrukken
HP 520 - Notebook PC Installatiehandleiding
Select
Built-In Device Options
Port Options
ENWW
To do this
●
Enable/disable fan always on while connected to an AC
outlet.
●
Enable/disable Intel® Data Execution Prevention or
AMD® PSAE Execution Disable. When enabled, the
processor can disable some virus code execution, which
helps to improve computer security.
●
Enable/disable LAN Power Save. When enabled, saves
power by turning off the LAN when not in use.
●
Enable/disable SATA Native Mode.
●
Enable/disable Dual Core CPU.
●
Enable/disable Secondary Battery Fast Charge.
●
Choose Bit-shift or LBA assisted HDD Translation Mode.
●
Enable/disable Windows direct application launcher.
●
Enable/disable HP Lockout.
●
Enable/disable embedded WWAN Device Radio.
●
Enable/disable embedded WLAN Device Radio.
●
Enable/disable embedded Bluetooth® Device Radio.
●
Enable/disable LAN/WLAN Switching. When enabled,
switches to a WLAN when a LAN is either unavailable or
disconnected.
●
Enable/disable Wake on LAN from Off.
●
Enable/disable the ambient light sensor.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION:
Disabling the USB port also
disables MultiBay devices and ExpressCard
devices on the advanced port replicator.
●
Enable/disable the 1394 port.
●
Enable/disable the cardbus slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the infrared port.
●
Enable/disable the optical disk drive.
●
Enable/disable the network controller.
System Configuration menu
7