Miele TOUCHTRONIC T 8003 Bedienings- en installatiehandleiding - Pagina 32
Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Miele TOUCHTRONIC T 8003. Miele TOUCHTRONIC T 8003 44 pagina's. Large capacity vented dryer angled control
Ook voor Miele TOUCHTRONIC T 8003: Productafmetingen (11 pagina's), Bedienings- en installatiehandleiding (44 pagina's), Dimension Handleiding (9 pagina's)
Pagina afdrukken
Installation
Installation beneath a counter
,
When removing the machine lid
to reduce the height of the machine,
a built under spacer kit* is
necessary.
It must be installed by a Miele
Service Technician.
The cover plate of the built under kit
replaces the appliance lid and
ensures electrical safety.
An installation manual is supplied with
the built-under spacer kit.
The electrical connection should be
near the dryer and accessible at all
times.
Provide necessary space for the
ducting when planning the
undercounter installation.
Extended machine feet* are
recommended at a built-in height of
1
more than 33
/
16
^ Set the extended machine feet at a
9
height of 1
/
16
Remove the original machine feet
and replace them with the extended
ones.
One or two filler frames* are
recommended at a niche height of
1
13
34
/
" to 34
/
" or 36" to 36
4
16
(870-885 / 915-930 mm).
* (optional accessory)
An existing continuous toe kick must
be interrupted at the dryer location!
28
" (840 mm).
" (40 mm).
5
/
"
8
Reinstallation of the machine lid
^ When reinstalling the appliance lid,
check the firm fit of the cover at the
rear bracket for safe transport of the
dryer.