HP 540 - Notebook PC Multiboot Gebruikershandleiding - Pagina 12

Blader online of download pdf Multiboot Gebruikershandleiding voor {categorie_naam} HP 540 - Notebook PC. HP 540 - Notebook PC 17 pagina's. Notebook tour - windows vista
Ook voor HP 540 - Notebook PC: Gebruikershandleiding (15 pagina's), Installatiehandleiding (15 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (20 pagina's), Gebruikershandleiding (27 pagina's), Manuallijnen (6 pagina's), Gebruikershandleiding (22 pagina's)

Pagina afdrukken
HP 540 - Notebook PC Multiboot Gebruikershandleiding

Setting a new boot order in Computer Setup

To set a boot device order that the computer uses each time it is turned on or restarted, follow these
steps:
1.
Open Computer Setup by turning on or restarting the computer, and then pressing
"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.
2.
Use the arrow keys to select System Configuration > Boot Options, and then press enter.
3.
Use the arrow keys to select Enable in the MultiBoot field.
NOTE:
4.
Use the arrow keys to select the order that you prefer in the Boot Order fields.
5.
To save your preferences and exit Computer Setup, use the arrow keys to select File > Save
Changes and Exit. Then follow the instructions on the screen.
Your preferences go into effect when the computer restarts.
6
Chapter 4 Choosing MultiBoot preferences
MultiBoot is enabled at the factory.
f10
while the