HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Gebruikershandleiding - Pagina 33

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HP 6930p - EliteBook - Core 2 Duo 2.8 GHz. HP 6930p - EliteBook - Core 2 Duo 2.8 GHz 41 pagina's. Notebook tour
Ook voor HP 6930p - EliteBook - Core 2 Duo 2.8 GHz: Specificaties (45 pagina's), Producthandleiding (16 pagina's), Gebruikershandleiding (15 pagina's), Software bijwerken (12 pagina's), Installatiehandleiding (15 pagina's), Gebruikershandleiding (17 pagina's), Netwerkhandleiding (16 pagina's), Gebruikershandleiding (25 pagina's), Gebruikershandleiding (27 pagina's), Overzicht (16 pagina's), Software-installatiehandleiding (8 pagina's), Installatie- en configuratiehandleiding (18 pagina's), Gebruikershandleiding (14 pagina's), Specificaties (48 pagina's), Gebruikershandleiding (32 pagina's), Gebruikershandleiding (27 pagina's)

Replacing an optical drive

CAUTION:

Shut down the computer before removing the optical drive from the upgrade bay. Do not remove the

optical drive while the computer is on, in the Sleep state, or in Hibernation.

If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the

power button. Then shut down the computer through the operating system.

To remove an optical drive from the upgrade bay:

Save your work.

Shut down the computer and close the display.

Disconnect all external hardware devices connected to the computer.

Unplug the power cord from the AC outlet.

Turn the computer upside down on a flat surface, with the upgrade bay toward you.

Remove the battery from the computer.

Loosen the upgrade bay screw (1).

Using a flat-bladed screwdriver, gently push the tab to release the optical drive (2).

To prevent information loss or an unresponsive system:

Replacing an optical drive