HP 8710w - HP Mobile Workstation Multiboot Gebruikershandleiding - Pagina 14

Blader online of download pdf Multiboot Gebruikershandleiding voor {categorie_naam} HP 8710w - HP Mobile Workstation. HP 8710w - HP Mobile Workstation 17 pagina's. Mobile workstation
Ook voor HP 8710w - HP Mobile Workstation: Quickspecs (39 pagina's), Gebruikershandleiding (15 pagina's), Gebruikershandleiding (20 pagina's), Software bijwerken (12 pagina's), Gebruikershandleiding (17 pagina's), Gebruikershandleiding (20 pagina's), Netwerkhandleiding (16 pagina's), Beveiligingshandleiding (35 pagina's), Gebruikershandleiding (34 pagina's), Installatiehandleiding (6 pagina's), Quickspecs (46 pagina's), Quickspecs (32 pagina's)

Setting a MultiBoot Express prompt

To set the computer to display the MultiBoot startup location menu each time the computer is started

or restarted, follow these steps:

Open Computer Setup by turning on or restarting the computer, and then pressing

"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

Use the arrow keys to select System Configuration > Boot Options, and then press enter.

In the Express Boot Popup Delay (Sec) field, select the length of time in seconds that you want

the computer to display the startup location menu before it defaults to the current MultiBoot setting

(when 0 is selected, the Express Boot startup location menu is not displayed).

To save your preferences and exit Computer Setup, use the arrow keys to select File > Save

Changes and Exit. Then follow the instructions on the screen.

Your preferences go into effect when the computer restarts.

Chapter 4 Choosing MultiBoot preferences

f10

while the