Miele HS15 Gebruiksaanwijzing - Pagina 14
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele HS15. Miele HS15 49 pagina's. Vacuum cleaner
Ook voor Miele HS15: Gebruiksaanwijzing (32 pagina's), Gebruiksaanwijzing (15 pagina's), Gebruiksaanwijzing (36 pagina's), Gebruiksaanwijzing (36 pagina's), Gebruiksaanwijzing (40 pagina's), Gebruiksaanwijzing (25 pagina's)
Pagina afdrukken
en
Exhaust filter change indicator
The exhaust filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50
operating hours, or approx. one year of
average use, the display will be
completely filled with red (dia. 13).
Using the accessories
supplied (dia. 14)
a Crevice nozzle
For cleaning in folds, crevices or
corners.
b Dusting brush with natural bristles
For cleaning skirting boards, ornate
and carved objects.
The head can be swivelled to adjust
the angle.
c Upholstery nozzle
For cleaning upholstery, mattresses,
cushions, curtains, covers etc.
To open the accessories
compartment (dia. 15)
^ Press the release button to open the
accessories compartment lid.
^ Take out the accessory you require.
^ Press down firmly on the lid to close
it.
Floorhead (dia. 16)
For general use and also for vacuuming
the stairs.
,
For safety reasons when
vacuuming stairs it is best to start at
the bottom of the stairs and move
upwards.
36
Use
To unwind the mains cable (dia. 17)
^ Pull the mains cable out to the
required length (max. cable length
approx. 7.5 m).
^ Insert the plug into the socket
correctly and switch on.
,
If vacuuming for longer than
30 minutes, the mains cable must
be pulled out to its fullest extent.
Otherwise there is a danger of
overheating and damage.
To rewind the cable (dia. 18)
^ Switch off at the wall socket and
remove the plug.
^ Press the rewind foot switch briefly.
The cable will rewind automatically.
To switch on and off (dia. 19)
^ Press the On/Off foot control s.
The Stand-by indicator light - in the
display and the LED - on the Comfort
handle both light up yellow.
Using for the first time (dia. 20 + 21)
Pressing the - button will directly select
the lowest setting, pressing the
+ button the highest setting will be
selected.
After that the vacuum cleaner will
switch on at the setting which was used
previously.
^ To do this, press the Stand-by button
- on the Comfort handle.