Burk Plus-X RP-8 Installatie- en bedieningshandleiding - Pagina 5

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Burk Plus-X RP-8. Burk Plus-X RP-8 9 pagina's.

Front Panel Indicators

Indicator

Power LED

Link LED

The Plus-X RP-8 Adapter is configured via its onboard web interface. Open a web browser and navigate

to 192.168.0.100. The web page will prompt you for a username and password. Enter the username

admin and password password.

Note: The default IP address is 192.168.0.100 and the default password is "password". If either of these

values has been changed and you do not know what they are, you need to perform a master initialization.

Press and hold the MASTER INIT button on the rear panel for three seconds. This will reset the Plus-X RP-8

Adapter to its factory default settings.

Settings

Click the Settings link on web page header to access the Plus-X RP-8 Adapter settings. Fill out the

following fields:



IP Address



Subnet Mask



Gateway



ARC Plus IP Address

Plus-X RP-8 Adapter Installation and Operation Manual Rev B

Front panel of the Plus-X RP-8 Adapter

State

Description

Off

Power is off

Green

Power is on

Amber

No firmware loaded (contact Customer

Support)

Flashing

Resetting to factory default settings

Green

Connected to ARC Plus

Off

No connection to ARC Plus

Flashing

Connected to ARC Plus and Maintenance Mode

Green, Red

Flashing Red

No connection to ARC Plus, unit is in

maintenance mode