Miele Triflex HX1 Cat&Dog SMML0 Gebruiksaanwijzing - Pagina 24

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Miele Triflex HX1 Cat&Dog SMML0. Miele Triflex HX1 Cat&Dog SMML0 38 pagina's. Cordless stick vacuum cleaner
Ook voor Miele Triflex HX1 Cat&Dog SMML0: Gebruiksaanwijzing (40 pagina's)

Pagina afdrukken

Miele Triflex HX1 Cat&Dog SMML0 Gebruiksaanwijzing

en-US

 After cleaning the pre-filter, place the

motor protection filter back into the

pre-filter securely, making sure it is

properly positioned.

 Lock the motor protection filter by

turning it clockwise as far as it will go.

 Replace the pre-filter in the dust con-

tainer.

 To do this, line up the guide lines on

the two sections and turn the dust

container lid back to its original posi-

tion.

 Close the cover at the bottom of the

dust container, making sure it clicks

into place.

 Replace the fine dust filter.

 Replace the dust container on the

PowerUnit connector.

Cleaning the dust container

Clean the dust container as required.

 Remove the dust container.

 Empty the dust container over a trash

can and lift the pre-filter upwards to

remove it (Fig. 36).

 Clean the dust container using water

and liquid dish soap.

 Dry the dust container carefully.

 Replace the pre-filter in the dust con-

tainer.

 Replace the dust container on the

PowerUnit connector (Figs. 38 + 39).

Cleaning the Electrobrush/handheld

brush (Fig. 06)

(The availability of the handheld brush

depends on the model)

 Separate the Electrobrush/handheld

brush from the vacuum cleaner con-

nection.

Removing threads and hairs (Fig. 40)

 Place the Electrobrush/handheld

brush upside down on a level, clean

surface.

 Use a pair of scissors to cut any

threads or hairs that have wound

themselves around the roller brush.

To guide the scissors, move along the

guide track on the roller brush.

Then run the vacuum cleaner to vac-

uum up the cut threads and hairs.

Removing the roller brush (Fig. 41)

(Not possible with the handheld brush)

You can take the roller brush out of the

Electrobrush in order to remove stub-

born soiling and clean the inside of the

Electrobrush.

 Unlock the flap on the side of the

Electrobrush so that the  symbol

becomes visible.

 Lift the flap up as far as it will go.

 Remove the roller brush.

 Clean the roller brush and remove

any stubborn dirt inside the Electro-

brush.

 Reassemble the Electrobrush in re-

verse order.