Miele F 1913 SF Handleiding voor installatie-instructies - Pagina 17

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Miele F 1913 SF. Miele F 1913 SF 33 pagina's.

Securing an alternative anti-tip

device

If the anti-tip brackets cannot be

attached securely, an alternative

anti-tip device can be used.

Ensure that there is no "give" between

the appliance and the anti-tip device.

If possible, always screw the

wooden beam to existing studs.

^ Cut a wooden beam

(cross section min. 3" x 4"

[75 mm x 100 mm]) to the required

length.

The length is equal to the width of the

installation niche.

– If the installation niche is deeper than

the appliance, select a beam with a

larger cross section, or attach two

beams.

Installing the appliance

– The beam must cover the appliance

by at least 2" (50.8 mm).

^ Mark the installation height (lower

edge of the beam) on the rear wall of

the niche.

^ Select screws according to the

thickness of the wooden beam.

Example: 3 ½" screw for 2x4 beam.

^ Determine the number of screws

based on the cavity width, to ensure

that the beam will be attached

securely.

^ Locate wall studs near the rear wall

of the cavity and mark drill holes in

the beam.

^ Pre-drill the wooden beam.

^ Attach the wooden beam to the rear

wall of the niche.

If a side-by-side installation is

desired, connect the two appliances

together. See the Installation Manual

included with the "Merging Kit".

Now prepare the water connection from

the appliance to the main supply line

(see "Plumbing").