Miele K 12820 SD edt Bedienings- en installatie-instructies - Pagina 36
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele K 12820 SD edt. Miele K 12820 SD edt 44 pagina's. Refrigerator with dynamiccooling
Ook voor Miele K 12820 SD edt: Bedienings- en installatiehandleiding (48 pagina's), Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatie-instructies (44 pagina's), Bedienings- en installatie-instructies (48 pagina's)
Changing the door hinging
^ Unscrew upper hinge pin k using
the spanner supplied.
^ Using a screwdriver remove covers
l with a flat-blade screwdriver.
^ Screw in upper hinge pin k on the
opposite side using the spanner
supplied.
^ Refit covers l from the back on the
opposite side, and then click them
into place at the front.
^ Remove caps m from door bearing
bushes in the door and refit on the
opposite side.
36
^ Using a screwdriver, remove spring
clamp n from underneath the door
and fit it on the opposite side.
^ Press the hinge pin e with the
washer o out of the hinge plate from
below.
Important. The opening on the
washer o must be placed over the
notch on the hinge pin e so that the
washer o sits on the washer of the
hinge plate e.
^ Place the hinge pin e with the
washer o in the door bearing bush
on the opposite side. Important: the
notch on the pin must face the inside
of the door and the groove the
outside.