Miele K 12820 SD edt/cs Bedienings- en installatie-instructies - Pagina 40
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele K 12820 SD edt/cs. Miele K 12820 SD edt/cs 48 pagina's. Refrigerator with dynamiccooling
Ook voor Miele K 12820 SD edt/cs: Bedienings- en installatie-instructies (44 pagina's)
Pagina afdrukken
Changing the door hinging
^ Remove cap h from the bearing
bush in the door and refit on the
opposite side.
^ Remove clamp i from underneath
the door and fit it on the opposite
side.
40
^ Pull hinge pin a with disc b and foot
c upwards to remove them.
^ Remove cover d.
^ Undo screws e and take hinge plate
f off.
^ Slightly loosen bearing screw h from
hinge plate f. Screw it into the hole
on the other side of hinge plate f
and then tighten the screw again.
^ Place cap d in the other hole.
^ Remove cover g and fit it into the
holes on the opposite side.