Miele K 2326 S Bedienings- en installatiehandleiding - Pagina 34

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Miele K 2326 S. Miele K 2326 S 36 pagina's.

These appliances can be fitted under-

neath a worktop run in which case it is

essential to provide a minimum area of

space around the appiance for ventila-

tion. Without this ventilation it cannot be

guaranteed that the appliance will work

to its full potential. The minimum ventila-

tion area required is 140 cm2. The mini-

mum height to the underside of the

worktop required to fulfil this require-

ment would be:

– K 2224 S

87.6 cm

– K 2214 S

87.6 cm

– K 2326 S

87.4 cm

– K 2316 S

87.4 cm

The appliance lid can be removed for

installation under a worktop. This re-

duces the height of the appliance by

3 cm, thus reducing the minimum

worktop height requirement by 3 cm.

^ Remove screws a from the rear of

the appliance.

^ Lift the appliance lid up at the rear

and then pull it towards the front of

the appliance to remove it.

If there is not adequate ventilation

when placed under a worktop then a

minimum ventilation area of 140 cm

must be provided for at the back of

the worktop itself.

Note that if the building under depth

of the worktop is only 600 mm and

an upstand (e.g. a Corian

splashback) is fitted above it, make

sure that it does not exceed 10 mm

in depth as otherwise it could hinder

ventilation from the appliance.