Miele K 31222 Ui Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Miele K 31222 Ui. Miele K 31222 Ui 11 pagina's.
![Miele K 31222 Ui Handmatig](/uploads/products/server2/3443010/3443010.png)
With furniture with door fittings (e.g.
stubs, seals etc.) the dimension of
these must be taken into account
when making sure there is a gap all
round of 42 mm.
Pull the appliance forwards by the
appropriate dimension.
Check again to make sure there is a
gap of 42 mm to the front edges of
the door fittings.
Useful tip: If possible, remove door
fittings and push the appliance into the
niche until all fixing brackets at the top
and bottom are in line with the front
edge of the housing unit side wall.
10841790-04
Installing the appliance
Aligning the appliance
When securing the appliance in the
niche at the top, the appliance
should sit lightly tensioned between
the floor and the worktop.
Adjust the front and rear feet
alternately according to the height of
the niche and make sure the
appliance is correctly aligned.
Proceed as follows:
Adjust both rear feet with appropriate
screws at the front right and left in the
appliance plinth using a flat-tip
screwdriver.
Use an Allen key to unscrew both
front feet.
Useful tip: As soon as the feet have
been unscrewed slightly, you can adjust
them with a screwdriver at the bottom
of the foot (see small illustration).