Miele K 854 i-2 Bedienings- en installatie-instructies - Pagina 20
Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele K 854 i-2. Miele K 854 i-2 40 pagina's. Refrigerator with stayfresh zone
Pagina afdrukken
Cleaning and care
Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents.
"Non-abrasive" cleaning agents are
also unsuitable as they can cause
matt areas to appear.
Make sure that water cannot get into
the electronic unit or into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Steam could reach the electrical
components and cause a short
circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
Before cleaning
^ Switch the appliance off by pressing
the On/Off button, switching off at the
wall socket and removing the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts e.g.
shelves for cleaning.
20
Cleaning the interior and
accessories
^ Clean the refrigerator section and the
StayFresh zone at least once a
month. Use warm water with a little
washing up liquid.
^ Accessories and shelves should all
be hand-washed. The butter dish is,
however, dishwasher safe.
^ Clean the condensate channel and
drain hole frequently, so that
condensate can drain away
unhindered. Use a straw or similar to
clear the drain if necessary.
^ After cleaning, wipe the interior and
accessories with a damp cloth and
dry with a soft cloth. Leave the door
open to air the appliance for a short
while.
E-Cloth
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department which is suitable for
cleaning surfaces such as stainless
steel, glass, plastic and chrome
without the use of chemicals.
Ventilation gaps
^ The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner. A build up
of dust will increase the energy
consumption of the appliance.