Miele KF 7632 S Bedienings- en installatiehandleiding - Pagina 37

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Miele KF 7632 S. Miele KF 7632 S 41 pagina's.

^ Pull bearing bush c downwards out

of hinge bracket d and refit it from

above into the hinge bracket.

^ Remove spacer f with a screwdriver

and refit it on the opposite side.

^ Remove plugs j from door bearing

bushes in the doors and refit on the

opposite side.

^ Unclip covers m at the front and slide

off to the side.

^ Unscrew handles k, and remove

stoppers l. Refit on the opposite

side of the door.

^ Slide covers m into position, making

sure they click into position correctly.

^ Fit the upper door in hinge pin a (re-

member to use the washers b) then

close the door.

^ Push middle hinge pin e from below

through hinge bracket d into the up-

per appliance door.

^ Check that the door is correctly

aligned. If necessary align it using

the long slots in hinge bracket d.

^ Hang the lower door in hinge bracket

d then close the appliance door.

In the following illustration the lower

door is not shown in the closed posi-

tion to make it easier to see what

happens next.

^ Turn door support b around, pull

hinge pin a out, and refit on the op-

posite side.

^ Fit both parts into hinge plate f. To

do this push hinge pin a through

hinge plate f into door support b.

Swing door support out, push up-

wards and re-assemble with screw

^ Align the lower door using the long

slot in hinge plate f with the appli-

ance housing. Then tighten screw c.

^ Refit plinth facia d pushing it firmly

into position.

^ With the lower door open, secure

cover e to the front of the plinth fa-

cia.