Miele CS 1112 Bedienings- en installatie-instructies - Pagina 36

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele CS 1112. Miele CS 1112 48 pagina's. Ceramic combiset
Ook voor Miele CS 1112: Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatiehandleiding (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (40 pagina's), Gebruikershandleiding (45 pagina's), Bedienings- en installatie-instructies (40 pagina's)

Installation of several appliances

When installing two or more appliances next to each other a spacer bar b must

be used between each one.

See "Fitting the spacer bars and support brackets".

Worktop cut-out

- two appliances

When installing two appliances, the

width of the cut-out required D is

calculated by adding dimensions A and

A = appliance width (288 mm or 380 mm or 576 mm) less 8 mm

B = appliance width (288 mm or 380 mm or 576 mm)

C = appliance width (288 mm or 380 mm or 576 mm) less 8 mm

D = width of worktop cut-out

5 0

Worktop cut-out

- three appliances

When installing three appliances the

width of the cut-out required (D) is

calculated by adding dimensions A, B

and C.

When installing more than three

appliances for each additional

appliance add the relevant appliance

width (288 mm or 380 mm or

576 mm) to dimensions A, B and C.

5 0