Miele CS 1223 Bedienings- en installatie-instructies - Pagina 32

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele CS 1223. Miele CS 1223 48 pagina's. Induction wok
Ook voor Miele CS 1223: Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (44 pagina's), Bedienings- en installatie-instructies (40 pagina's), Bedienings- en installatie-instructies (44 pagina's)

Safety instructions for installation

The appliance must only be installed

and connected to the electricity

supply by a suitably qualified and

competent person in strict

accordance with current national

and local safety regulations.

To avoid the risk of damaging the

appliance fit the wall units and

extractor hood before installing it.

The veneer or laminate coatings of

worktops (or adjacent kitchen units)

must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

This appliance must not be used in

a non-stationary location (e.g. on a

ship).

After installation, ensure that the

connection cable is without hindrance

and that there is no mechanical

obstruction which could damage it,

such as a drawer.

The appliance may only be installed

above a Miele oven if the worktop is at

least 40 mm thick.

This appliance must not be installed

over a dishwasher, washing machine,

tumble dryer, refrigerator or freezer.

The high temperatures radiated by the

appliance could damage the appliance

below.

The minimum safety distances given

on the following pages must be

observed.

All dimensions in this instruction booklet

are given in mm.