Miele KM 363 G Handleiding voor installatie-instructies - Pagina 5

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Miele KM 363 G. Miele KM 363 G 24 pagina's. Gas hobs
Ook voor Miele KM 363 G: Handleiding voor installatie-instructies (28 pagina's), Handleiding voor installatie-instructies (28 pagina's)

Building in

Fit wall units and extractor hood

before fitting the hob, to avoid

damaging the appliance.

The veneer or laminate coating of

worktops (or adjacent kitchen

units) must be treated with 100 °C

heat-resistant adhesive which will not

dissolve or distort.

Any backmoulds must be of

heat-resistant material.

Ideally the gas hob should be

installed with plenty of space on

either side. There may be a wall at the

rear and a tall unit or wall at one side.

On the other side, however, no unit or

divider should stand higher than the

hob (see illustrations).

This equipment is not designed for

maritime use or for use in mobile

installations such as caravans, aircraft

etc. However it may be suitable for

such usage, subject to a risk

assessment of the installation being

carried out by a suitably qualified

engineer.

Due to the heat radiated by the hob

and to allow cooking fumes to

dissipate, it is essential that a

minimum safety distance a of 100

mm is maintained between the

worktop cut-out and adjacent

furniture, e.g. a tall unit.

Safety instructions

recommended

not recommended

not allowed