ALLNIC AUDIO T-1500 MK2 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ALLNIC AUDIO T-1500 MK2. ALLNIC AUDIO T-1500 MK2 13 pagina's. 300b set stereo integrated amplifier
Pagina afdrukken
• Allnic uses a high quality 41 step silver contact attenuator (all resistors non-inductive) instead of a
carbon filmed slide potentiometer.
• Beautiful 20KHz square wave response (See Figures 1-3).
Fig.1 Square Wave 50Hz
Fig.3 Square Wave 20KHz
Measured by LEADER LAG-126 Audio Signal Generator and KENWOOD CS-4125 Oscilloscope.
• As are all Allnic Audio products, the T-1500 MK2 is fully RoHS (EU Reduction of Hazardous
Substances regulation) compliant in construction and materials.
WHAT'S IN THE BOX?
Please check that the shipping box contains the following:
• One (1) Allnic T-1500 MK2 300B SET stereo integrated amplifier
• One (1) Owner's Manual
• Power cord
• Remote Control
Note:
The T-1500 MK2 ships with the tubes installed.
1)
The T-1500 MK2 will work with most IEC type aftermarket power cords. The Allnic ZL-3000 and
2)
ZL-5000 power cables will make an excellent match. Of course, only you can determine the
power cord that works most synergistically with the T-1500 MK2 in your system.
Be sure the T-1500 MK2 is labeled for the AC voltage of your location (See Figure 2). If it is not,
3)
DO NOT connect it to your AC outlet. Please contact your Allnic dealer.
Fig.2 Square Wave 1KHz
5