ALLO Allo PRI Gateway Server Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} ALLO Allo PRI Gateway Server. ALLO Allo PRI Gateway Server 12 pagina's.

7. Click on the „Submit‟ button at the end of the page. The SIP Trunk will be created

and you will see the page on Figure 4-5 displaying the "Apply Configuration

Changes Here" pink ribbon on top of the screen.

Click in the "Apply Configuration Changes Here" link

Figure 4-5. Apply Configuration Changes Here

9. With this you have finished creating a SIP Trunk that will be used by the Allo PRI

Gateway to register with the Elastix Server. Now, go to "PBX => PBX

Configuration => Outbound Routes" to configure the outbound route to the SIP

Trunk. Fill in the following information: (Figure 4-6)

Route Settings

Route Name: ("Outbound_Route_Allo" in this example)

Dial patterns

Prefix: ("8" in this example) | Match pattern: ("." in this example)

Trunk Sequence for Matched Routes

0: ("AlloGateway" in this example)

Allo PRI Gateway Server Setup Guide

Figure 4-6. Add Route

PaloSanto Solutions