Allo RemoteControl NICE HSRE12 Instructies - Pagina 3

Blader online of download pdf Instructies voor {categorie_naam} Allo RemoteControl NICE HSRE12. Allo RemoteControl NICE HSRE12 3 pagina's.

Deleting all devices memorised on all outputs of HSRE12

To delete all memorised devices, proceed as follows:

01.Press and hold key S1, then power up;

02. Wait for 10 seconds, keeping key S1 pressed; a BEEP confirms deletion of the devices;

03. Release S1; Led 1 starts flashing to indicate the wait time for memorisation of the

devices.

Deleting all devices memorised on one output of HSRE12

All devices memorised on a single output can be deleted as follows:

01. Press S1 (PROG) to activate programming mode; a BEEP indicates the start of

programming;

02.Press key S2 (SEL.CAN) repeatedly to select the required output;

03.Press and hold key S1; wait 10 seconds and then a BEEP confirms deletion of the

devices on the selected output;

04. To delete other devices on other outputs, repeat points 02 and 03

Dip Switch configuration:

There are 6 dip switches on the HSRE12 receiver, which

enable configuration of a number of operating parameters;

Visit our website: www.Alloremotecontrol.com