3A HEALTH CARE RESPIRO Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} 3A HEALTH CARE RESPIRO. 3A HEALTH CARE RESPIRO 8 pagina's. Professional piston compressor nebulizer

PROFESSIONAL PISTON COMPRESSOR NEBULISER
Piston compressor
1
2
Power cord
3
ON/OFF Switch
Dear Customer,
this nebuliser is a high quality device for inhalation therapy for asthma, chronic bronchitis, and other respiratory illnesses.
This medical device generates aerosols with variable characteristics to adapt to the patient's respiratory pathology and
generating a medicinal mist of particles that are small enough to reach even the deepest regions of your lungs and be
of maximal benefit.The operation and usage of the device is very straightforward. All common liquid medication can be
used for inhalation therapy.Please read through these instructions carefully so that you understand all functions and safety
information. We want you to be happy with your RESPIRO product. For any further questions you may have, please ask
your chemist or usual retailer.
IMPORTANT SAFETY INSTRUCTIONS
This device may only be used for the purposes described in this booklet. The manufacturer cannot be held liable for dama-
ge caused by incorrect application. This device is not suitable for anaesthesia and lung ventilation. This device should only
be used with original accessories as shown in these instructions. Do not use the device if you think it is damaged or notice
anything unusual. Never open the device. This device comprises sensitive components and must be treated with caution.
Observe the storage and operating conditions described in the «Technical Specifications» section. Protect it from: - water
and moisture - extreme temperatures - impact and dropping - contamination and dust - direct sunlight - heat and cold.
Only use the medication prescribed for you by your doctor and follow your doctor's instructions with regard to dosage, du-
ration and frequency of the therapy. All accessories should only be used by one person. Never bend the nebuliser over 60°.
- The unit should not be used in the presence of anesthetic mixture inflammable with air, oxigen or nitrous oxide.
- Device not protected against splashes.
Ensure that children do not use the device unsupervised some parts are small enough to be swallowed.
Use of this device is not intended as a substitute for consultation with your physician.
In view of their length, the power cord and connection hose could constitute a strangulation hazard.
PREPARATION AND USAGE OF THIS DEVICE
Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and Disinfec-
ting».
1) Assemble the nebuliser kit 12 Ensure that all parts are complete.
2) Fill the nebuliser with the inhalation solution as per your doctor's instructions. Ensure that you do not exceed the ma-
ximum level.
3) Connect the nebuliser with the air hose 6 to the compressorm 1 and plug the power cord 2 into the socket.
4) Switch the ON/OFF switch 3 to position «I» to turn on the device and place the mouthpiece 7 in the mouth or fit one of
the face masks over mouth and nose. The mouthpiece gives you a better drug delivery to the lungs. Choose between
adult 8 or child face mask 9 and make sure that it encloses the mouth and nose area completely.
5) Breathe in and out calmly during the therapy. Sit in a relaxed position with the upper body upright. Do not lie down
while inhaling. Stop inhalation if you feel unwell.
6) After completing the inhalation period recommended by your doctor, switch the ON/OFF switch 3 to position «O» to
turn off the device and unplug it from the socket.
7) Empty the remaining medication from the nebuliser and clean the device as described in the section «Cleaning and
Disinfecting».
TECHNOJET NEBULIZER
This compressed air system for aerosoltherapy is equipped with the innovative Technojet nebuliser with a breath enhanced
valve system. This enables the correct quantity of medication to be featured to the respiratory capacity of each patient.
The valve controls the fl ow of medication during inhalation, thus reducing medication loss during exhalation.
Technojet increases the quantity of inhaled medication.
Technojet is capable of nebulising effi ciently all medications for inhalation therapy.
A synchronized functioning of the nebuliser is possible only by using the mouthpiece with expiratory valve. In order to incre-
ase nebulising speed, it is recommended to remove the inhalation valve (white support) when using a mask or a nose fork.
CHOOSING BETWEEN 3 DIFFERENT NEBULISATION RATES
The nebuliser generates an aerosol with variable characteristics to adapt to the patient's respiratory pathology. It can pro-
duce an aerosol with the granulometric characteristics that will deposit the maximum amount of the drug in the respiratory
tract being treated. Choose one of the 3 following therapeutic treatment settings by regulating the wheel on the nebuliser's
5 upper body:
- Upper air passages (nose, throat, etc.): position the wheel towards the bottom at number 3; the aerodynamic diame-
ter of the aerosol particles will be from 10 to 14 micron.
- Tracheal / bronchial tract: position the wheel in the center at number 2; the aerodynamic diameter of the aerosol
particles will be from 6 to 9 micron.
4
Air filter compartment
5
Technojet Nebulizer
6
Air hose
EN
7
Mouthpiece
8
Adult face mask
9
Child face mask
3
10 Nosepiece
11 Replacing air filter
12 Assembling nebuliser kit