Alloy POE100 Series Gebruikershandleiding - Pagina 8

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alloy POE100 Series. Alloy POE100 Series 9 pagina's. 10/100 base-tx to 100base-fx converter poe power provider

Pagina afdrukken

7. LED Description

The following table describes the LED's located on the POE100 Series media

converter.

LED

FX LNK/ACT

FDX/COL

TP LNK/ACT

TP 100

PWR

PoE PSE-TP

15.4W

8. DIP Switch Configuration

Fig. 10 Reset button and S1 – Bit 1, 2, 3, 4, 5, 6, Configuration and Settings

Reset

S1-1 TP Port Mode

S1-2 TP Port Speed

S1-3 TP Port Duplex

S1-4 LFP

S1-5 Fibre Port Duplex

S1-6 POE ON/OFF

Colour

Lit when fibre connection has link

Green

Blinks when fibre data is present

Lit when full-duplex mode is active

Amber

Off when half-duplex is active

Blinks when collision is present

Lit when Copper connection has link

Green

Blinks when Copper data is present

Lit when Copper speed is 100Mbps

Green

Off when Copper speed is 10Mbps

Lit when +5V power is supplied

Green

Lit when PoE power output is active

Lit when PoE power output is disrupted

Red

(In case of over temperature or over current )

Green

Lit when PD Class Type is Class 1

Green

Lit when PD Class Type is Class 2

Green

Lit when PD Class Type is Class 0 or 3

: If S1-1, S1-2, S1-3, S1-4 or S1-5 status is

changed, please press this button for your

settings to take effect.

: AUTO(Default) or FORCE

: 100 or 10 when TP is at Force

: FDX or HDX when TP is at Force

: LFP Enabled (Default) or Disabled

: 100FDX (Default) or 100HDX

: Enabled (Default) or Disabled

Function