Dialogic 2000 Series Opmerking over installatie en configuratie - Pagina 13
Blader online of download pdf Opmerking over installatie en configuratie voor {categorie_naam} Dialogic 2000 Series. Dialogic 2000 Series 17 pagina's. Media gateway
Ook voor Dialogic 2000 Series: Snelstarthandleiding (4 pagina's)
Pagina afdrukken
Configuring Calls from TDM to Microsoft
Directing PSTN / PBX Calls to Mediation Server
•
It is necessary to direct all incoming calls from the TDM (PSTN) side to the mediation server.
This is done in the Routing Table tab of the web interface. Select the Inbound TDM Call Routing
tab and enter the IP-address or FQDN of the Mediation server in the URI field.
•
Hit "Submit" to save the changes.
Setting Up Route from TDM to IP
•
Now you will need to select the "Inbound TDM Rules" to create a route for the incoming TDM
calls to the VoIP endpoint:
•
Select the "Inbound TDM Rules" radio button and the select the first "Inbound TDM Rule"
•
In the "Outbound Routes" for this rule select the "Outbound Destination" and set it to "VoIP"
•
For the "Host Group" select the name that was created while setting the IP address in the last
step.
•
Hit "Submit" to activate the rule.
®
Office Communications Server 2007 R2
Name of VoIP Endpoint
(needed for setting up
route)
®
Dialogic
2000 Media Gateway Series Installation and Configuration Note
Set IP address of
Mediation server
13