ALLOYLED AL-60-03-0004-V2 Operatie - Pagina 3
Blader online of download pdf Operatie voor {categorie_naam} ALLOYLED AL-60-03-0004-V2. ALLOYLED AL-60-03-0004-V2 3 pagina's. Receiver for wireless remote controllers
Pagina afdrukken
Synchronizing Multiple Receivers in a Single Zone
MASTER SLAVE
1. Select one receiver to be the master and install the jumper on one pin.
2. Set all remaining receivers as slaves by placing the jumpers on both pins. Note: There can only be one
master, but there can be multiple slaves.
3. Ensure that all receivers are hard-wired to each other, as shown in the wiring diagram on page 2.
4. To activate the master function, turn the power to the master receiver off and then on.
5. Pair the master to the desired zone. All slaves connected to the master will now be in the assigned zone.
The lights are now synchronized and will remain synchronized after powering off and then back on.
www.AlloyLED.com
page 3 of 3
®
®
JUMPER
Master
|
Call: 800.910.LEDS [5337]
JUMPER
MASTER SLAVE
Slave
| Text: 510.400.6690
|
v1.1