Dialogic IMG 1010 Snelstarthandleiding - Pagina 3

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Dialogic IMG 1010. Dialogic IMG 1010 4 pagina's. Connecting dc power
Ook voor Dialogic IMG 1010: Handleiding voor installatie-instructies (6 pagina's), Snelstarthandleiding (11 pagina's), Snelstarthandleiding (18 pagina's), Snelstarthandleiding (10 pagina's), Snelstarthandleiding (10 pagina's), Handleiding voor installatie-instructies (9 pagina's)

The power module plugs are in a small plastic bag included in your shipment.

Insert the plug into the DC power module and secure with screws.

Turn power ON at power source.

Press the required circuit breaker on DC power module to ON (I).

Warnings/Cautions

Failure to turn power OFF at the power source may result in electrical shock.

Ensure that the wires are pushed into the plug far enough, so that none of the copper is visible.

The DC power module plugs are polarity sensitive. The unit will not operate if the plugs are not wired correctly. See wiring diagram below.

A readily accessible disconnect device must be incorporated external to the equipment in the event the power needs to be removed from

this product.

Redundant Power Source Connections

A second power source can be added to the chassis for DC Power redundancy. The secondary source serves as backup to the primary source

(power supply). When a second power source is available, connect the primary and secondary power sources in a redundant fashion as

displayed in the diagram below.

DC Connections

Complete the following steps to connect a redundant power source to the chassis

Ensure both circuit breakers on the DC power module are set to OFF (O).

Turn power OFF at redundant power source.

Route the RET and -48V wires from the redundant power source to the DC power module plug. Secure the wires to the plug with screws.

The power module plugs are in a small plastic bag included in your shipment.