Dialogic Brooktrout TR1034 Installatiehandleiding - Pagina 2

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Dialogic Brooktrout TR1034. Dialogic Brooktrout TR1034 2 pagina's. Did/did & loop start pci fax board
Ook voor Dialogic Brooktrout TR1034: Snelle installatie (2 pagina's), Installing (2 pagina's)

Pagina afdrukken

Understanding LED Signals

LEDs on the Mounting Bracket

The LEDs on the mounting bracket provide

information about the status of the different systems

on the board. To identify and locate these LEDs, see

Figure 4.

Connector A

Connector B

CHANNEL

Channel LEDs

Board Status LED

BOARD

STATUS

Figure 4. End Panel LEDs

The following tables describe how the end panel

LEDs provide information:

Board Status LED

Meaning

Flashing yellow

Board is powered up and is

(1.5 second rate)

passing self test checks.

Steady red

Board is powered up, and the self

test has failed.

Flashing yellow

Board is powered up and is

and green

downloading firmware.

Flashing green

Firmware is downloaded, and the

(1 second rate)

board is in service.

Solid green

Board is hung, needs to be reset.

Flickering red

Board has failed, needs to be reset.

Off

Board has no power, or board is

hung and needs to be reset.

Channel LEDs

Meaning

Off

Channel is on hook.

Flashing at 0.5 second rate Channel is off hook.

Incoming ring signal.

Flashing at Ring Cadence

* Ring Cadence varies country by country.

LEDs on the Fax Board

The LEDs on the board provide information about the

status of the board. To locate these LEDs, see

Figure 5.

The following table describes how the LEDs on the

board provide information:

LED

Meaning

DSP0

Displays the status for DSP0 that supports the

four ports on the A connector (RJ-45). After

the firmware is loaded and during normal

execution, this LED blinks about every

second. If the LED is not blinking, the DSP0

firmware is not running.

DSP1* Displays the status for DSP1 that supports the

four ports on the B connector (RJ-45). After

the firmware is loaded and during normal

execution, this LED blinks about every

second. If the LED is not blinking, the DSP1

firmware is not running.

Power

Steady green indicates good board power.

* DSP1 and its associated LED are only loaded on the 8

port version of the board.

RJ-45 Connectors

PCI Connector

Status LEDs

This graphic displays an eight channel board.

Mounting Bracket

Figure 5. Dialogic® Brooktrout® TR1034 Analog PCI

Series Board

Using the Dialogic®

Brooktrout® TR1034 Analog

Fax Board

Once you have installed the TR1034 Analog Fax

Board, install and configure your fax or voice

software application according to instructions

included with the software.

Module Number Switch (SW-1)

Getting Help

Dialogic provides technical support for customers

who have purchased hardware or software products

from Dialogic. If you purchased products from a

reseller, please contact that reseller for technical

support.

This equipment contains no user serviceable parts and

is not intended for repair by unauthorized personnel.

If you experience problems with the TR1034 Analog

Fax Board, for repair or warranty information, please

use the contact information below. If the equipment is

causing harm to the telephone network, the telephone

company might request that you disconnect the

equipment until the problem is resolved.

To obtain technical support, please use the website

obtain technical support, please use the website:

www.dialogic.com/support

reproduce this document in whole or in part without permission in writing from Dialogic

Corporation at the address provided below.

All contents of this document are subject to change without notice and do not represent a

commitment on the part of Dialogic Corporation or its subsidiaries. Reasonable effort is

made to ensure the accuracy of the information contained in the document. However, due

to ongoing product improvements and revisions, Dialogic Corporation and its subsidiaries

do not warrant the accuracy of this information and cannot accept responsibility for errors

or omissions that may be contained in this document.

LEDs

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH

DS6 - DSP0

DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS

DS7 - DSP1

DOCUMENT. EXCEPT AS EXPLICITLY SET FORTH BELOW OR AS PROVIDED IN A

SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO

DS8 - Power

LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS

INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A

PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY

INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life sustaining, critical

control or safety systems, or in nuclear facility applications.

It is possible that the use or implementation of any one of the concepts, applications, or

ideas described in this document, in marketing collateral produced by or on web pages

maintained by Dialogic Corporation or its subsidiaries may infringe one or more patents or

other intellectual property rights owned by third parties. Dialogic Corporation or its

subsidiaries do not provide any intellectual property licenses with the sale of Dialogic

products other than a license to use such product in accordance with intellectual property

owned or validly licensed by Dialogic Corporation or its subsidiaries. More detailed

information about such intellectual property is available from Dialogic Corporation's legal

department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9.

The software referred to in this document is provided under a Software License

Agreement. Refer to the Software License Agreement for complete details governing the

use of the software.

Dialogic Corporation encourages all users of its products to procure all necessary

intellectual property licenses required to implement any concepts or applications and does

not condone or encourage any intellectual property infringement and disclaims any

responsibility related thereto. These intellectual property licenses may differ from country

to country and it is the responsibility of those who develop the concepts or applications to

be aware of and comply with different national license requirements.

Dialogic, Dialogic Pro, Brooktrout, Cantata, SnowShore, Eicon, Eicon Networks,

Eiconcard, Diva, SIPcontrol, Diva ISDN, TruFax, Realblocs, Realcomm 100, NetAccess,

Instant ISDN, TRXStream, Exnet, Exnet Connect, EXS, ExchangePlus VSE, Switchkit,

N20, Powering The Service-Ready Network, Vantage, Connecting People to Information,

Connecting to Growth and Shiva, among others as well as related logos, are either

registered trademarks or trademarks of Dialogic.