AllPondSolutions AqueECO 14000 Handmatig - Pagina 10

Blader online of download pdf Handmatig voor {categorie_naam} AllPondSolutions AqueECO 14000. AllPondSolutions AqueECO 14000 14 pagina's.

My Unit is Cutting Out

1. For optimum function of the unit, we highly recommend the pump is

positioned on a brick, so it is not resting directly on the bottom on the pond.

This is to prevent large clumps of debris blocking the inlet and restricting the

ﬂow.

2. Ensure that all O-rings are in place and well lubricated.

3. Locate the impeller and shaft in the pump and inspect for damage and clear

the ﬁttings and parts of any waste build-up.

4. Ensure that the plastic propeller part of the impeller is attached to the

magnetic part and that they have not come apart or split. If these parts looks

ﬁne and there are two rubber grommets ﬁtted on each end of the shaft, or

already inside the ﬁttings, then re-assemble the unit.

If none of the above resolves your issue, or you require spare parts for your

pump, please contact the supplier of your unit.